MARKSMAN MK12 Mod0 Gen2 Style GBB Airsoft

More info
Accessories
Comments (0)

Notes:

※ On the Marksman MK12 Mod0 Gen2 GBB model, the updated HOP-UP design allows inner barrel and HOP-UP rubber replacement without removing the handguard or outer barrel.
※ The "EVO" AR GBB system HOP-UP group can also be adjusted with a standard 2mm hex wrench.

Specifications:
● Product Brand : MARKSMAN
● MADE IN TAIWAN.
● Length : 950mm (Fixed stock) /1065mm (w/ Suppressor)
● Weight : 3700g (With empty magazine)
● Inner Barrel : 420mm
● Magazine Capacity : 20 Rounds
● Muzzle Velocity(Power) : 120m/s (390 fps) @ 0.2g BB
● Bullet : 6mm BB
● Material : Aluminum, Steel, Nylon, Rubber.

● HOP-UP : Yes, Adjustable
● Blowback : Yes
● Firing Modes : Safety /Semi Auto / Full Auto

● Power Source : AIRSOFT Green Gas

Content :
● MK12 Mod0 Gen2 GBB x1
● Mock Suppressor x1
● Gas Magazine x1
● Hop-Up Quick-adjust Tool x1

● User Manual x1

Features:
● V-system.

● MK12 Mod0 Gen2 /MK12 SPR (Special Purpose Rifle) style setup :

->Steel OPS style muzzle break.
->Steel OPS style muzzle break thread protector.

->Steel OPS style SPR collar.

->Steel 18" integrated outer barrel.

->PR style Gen1 folding front sight /Gas block.

->Steel front sight base, aluminum sight column.

->PR style Gen2 carbon fiber forearm set.

->Aluminum conical cover and steel barrel nut.

->Aluminum 7-slot rail section (x3).

->6061 Aluminum CNC process ARM #38 style top rail.

->6061 Aluminum CNC process ARM #40 style flip up rear sight.

->Steel rear sight port and parts.

->Aluminum PR style M84 gas buster charging handle with steel latch.

->AR flat top rail upper with A1 style lower.

->Realistic color difference of receivers.

->Steel forward assist button.

->Steel dust cover.

->Steel magazine catch.

->Steel bolt catch.

->Steel selector, single-side.

● OPS style 12th AIRSOFT mock suppressor.
->Full aluminum construction.
->6061 aluminum metrial, CNC process.
->Anodizing surface finish.
->Thread base with 14mm CCW adapter at front (For AIRSOFT tracer).
※For this MK12 OPS muzzle device ONLY.
※The maximum size of the AIRSOFT tracer is less than 35 mm in diameter and less than 90mm in length.
※The AIRSOFT tracer can be installed in 14mm CCW thread adapter at front of suppressor base (inside the tube).
※The inside of the tube is full empty, with NO other structure and NO foam material.

● "EVO" (Evolution) AR GBB system products.

● EVO AR GBB HOP-UP Group :

->TDC (Top Dead Center) design.
->Steel Hop-Up chamber and components.
->Rear screw adjustment.
->Click count when adjusting.

->New disassembly design allows for inner barrel /hop-up rubber changes without removing the outer barrel or handguard.
->Included a EVO Hop-Up quick-adjust tool.

● EVO AR GBB Bolt Carrier Group :
->Steel bolt carrier.
->Integrated gas relief ports.
->Steel gas key.
->Steel nozzle guide (cam pin style).
->New feeding nozzle set (with NPAS).
->Features a new quick-release nozzle design for easy maintenance.
(Please note that the rear E-clip must be removed before detaching the nozzle.)

● V3 Steel fire control unit (Hammer Set) :

->V3 steel valve knocker set.

->Full steel fire control unit (hammer set).
->With CRUSADER steel two stage trigger set.

● M16/ M4 V4 STANAG /20rds short mag style gas magazine.

->Enlarges the rear opening of the top cover, to optimize the stability of the bolt catching function.

->With switch-optional dry fire shooting function. (Red parts)

->With renewed valve base component. (Silver parts)

->Improved gas magazine, light-weight, better performance.
->With marking base plate.

※ Limited Edition
※ Compatible with VFC M4 STANAG style gas magazine.
※ Compatible with VFC VMAG style gas magazine.
※ For inner barrel replace, It is recommended to use : About 450-460 mm length (For original outer barrel length setup).